Selection of Materials

SculptureStone^®
Boutique Collection

Mineral Composite
Designer Collection

Acrylic
Designer Collection & MTI Basics^®

• All materials and labor - 100%

• All materials and labor - 100%

• All materials and labor - 100%

• Engineered Solid Stone^®
• Approximately 70% of the material is organic.
• Premium-grade ultrafine ground minerals, Quartz and Bauxite.
• Mined in the Southeast from the best sources.
• Premium, ultra-high-grade proprietary resin.
• UV and performance properties are built into the high-performance resin.
• Best material for thermal properties.

• Approximatly 65% of the material is organic.
• Medium-grade fine ground minerals, Granite / Dolomitic Limestone.
• Mined locally in Georgia from a large natural granite and marble resource.
• High-grade casting Resin.
• The UV and performance properties are built into the Polyresin coating, specially formulated for MTI.
• Thermal properties exceed acrylic.

• High-gloss cross-linked cast acrylic, American made.
• Reinforced with a thick layer of fiberglass / resin / titanium.
• The backing adds strength, structural integrity and increased insulation.
• Backing also helps keep bath water warm.

• The ultrafine ground minerals are refined into a fine powder and combined with high-performance resins that are binding agents.
• This mixture is liquefied, poured into a mold and cured.
• Then hand-finished.

• Ground minerals and resin (binding agents) are combined.
• The mixture is liquefied and poured into a mold that has been sprayed with gloss coating, and then cured.
• Then hand-finished.

• Acrylic is thermoformed with a mold, and the back is sprayed with a thick layer of fiberglass/resin/titanium.
• Then hand-finished.

• 100% solid thru and thru, luxurious molded stone.
• You can actually feel the difference.
• Products are durable, non-porous, soft, smooth and UV- resistant.
• Highest insulating properties keep bath water warmer longer.

• Impact-resistant hard surface, Polyresin glossy coating.
• Non-porous surface that is shock-resistant for durability.
• UV- and stain-resistant.
• High insulating properties.

• Non-porous surface is durable and impact/shock resistant.
• UV- and stain-resistant.
• Good insulating properties.

• Material Colors: White or Buscuit

• Coating : White

• Material Colors: White or Buscuit

• Soft matte or hand-polished deep gloss finish

• Glossy finish

• Glossy finish

• Stain-, mold- and mildew-resistant.

• Stain-, mold- and mildew-resistant.

• Stain-, mold- and mildew-resistant.

• Easy to clean and maintain with non-abrasive cleaners.
• Small surface scratches can be sanded out.

• Easy to clean and maintain with non-abrasive cleaners.
• Coating allows for repairability.
• Small surface scratches can be polished out.
• Deep scratches may require technical assistance.

• Easy to clean and maintain with non-abrasive cleaners.
• Small scratches can be removed by applying a thin coat of automotive polishing liquid and buffing lightly with a clean cloth.
• Deeper scratches may require technical assistnce.

• Freestanding Tubs
• Drop-In Tubs
• Vessel, Semi-Recessed and Undermount Sinks
• Wall-Mount and Pedestal Sinks
• Counter-Sinks, Counter Tops and Vanity Sinks
• Shower Bases

• Freestanding Tubs

• Freestanding Tubs
• Drop-In Tubs
• Alcove and Integral Skirted Tubs
• Bar, Prep and Laundry Sinks
• Kitchen Sinks
• Specialty Baths including:
• Walk-in-Tub
• Specialty Tubs (very large and small)
• Foot Spas